Jeep JK Weld-On Rear Track Bar Bracket 07-18 Wrangler JK/JKU Synergy MFG

Synergy Manufacturing SKU: FSVG_8072-01

$95.00

Shipping calculated at checkout

Sold Out

Synergy Jeep JK Weld-On Rear Track Bar Bracket to replace the thin and weak factory bracket
Fits:

  • 07-18 Jeep Wrangler JK
  • 07-18 Jeep Wrangler Unlimited JK

Details:

  • Synergy JK Weld-On Rear Track-Bar Bracket
  • Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
  • Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
  • Multiple Track-bar holes for suspension adjustments
  • Designed to fit stock JK axle tubes, 3.150 inch diameter
  • Will fit other diameter axle tubes with minor trimming
  • Track bar relocation bolt holes are 2.900 Inch 3.713 Inch and 4.525 inch above the stock track bar mounting location

Note:

  • Requires the use of a minimum 3 inch bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used7